STANDARD WORK BENCH
 

All models constructed of 12 gauge steel tops, back and side stops, and legs; 16 gauge stringers and shelves. The top, stringer, and legs are all reinforced for additional strength. Standard height of the work benches is 32-1/2" high. Benches can be made 34" high at an additional charge. All benches 96" or longer have three bench legs. Shelves are 15-1/4"W. Drawer units are 1424-1 (14W" x 23-1/2"D x 5"H).

BSD Series

 

WORK STATIONS

Top with back and side stops, stringer, shelf, and two drawer units. Drawer units are 1424-1 (14"W x 23-l/2"D x 5"H). Work bench available with 1/4" hard tempered peg board or 1/2" homosote board (please specify when ordering). Convenient homosote board and peg board back used for hanging small tools, paper work, etc. All back boards 48" high.

BSDD Series with Peg Board Back
  

WORK STATIONS

500 lbs. Capacity - 5" Soft rubber casters (four swivel).
300 lbs. Capacity - 3" Soft rubber casters (four swivel).

These tables include back and side stops on shelves to prevent parts and other items from rolling off. Steel pads on legs prevent floor marks. Sturdy deep drawers furnished with padlock loops. Shelves S models 16 gauge H,L,K models 14 gauge. Drawer size 14"W x 16"D x 5"H. Cylinder lock available at additional charge.

EDB Series
  

WORK STATIONS

500 lbs. Capacity - 5" Soft rubber casters (four swivel).
300 lbs. Capacity - 3" Soft rubber casters (four swivel).

These tables include back and side stops on shelves to prevent parts and other items from rolling off. Steel pads on legs prevent floor marks. Sturdy deep drawers furnished with padlock loops. Shelves S models 16 gauge H,L,K models 14 gauge. Drawer size 14"W x 16"D x 5"H. Cylinder lock available at additional charge.

EWB Series
  

WORK STATIONS

500 lbs. Capacity - 5" Soft rubber casters (four swivel).
300 lbs. Capacity - 3" Soft rubber casters (four swivel).

These tables include back and side stops on shelves to prevent parts and other items from rolling off. Steel pads on legs prevent floor marks. Sturdy deep drawers furnished with padlock loops. Shelves S models 16 gauge H,L,K models 14 gauge. Drawer size 14"W x 16"D x 5"H. Cylinder lock available at additional charge.

EWS Series
  

WORK STATIONS

500 lbs. Capacity - 5" Soft rubber casters (four swivel).
300 lbs. Capacity - 3" Soft rubber casters (four swivel).

These tables include back and side stops on shelves to prevent parts and other items from rolling off. Steel pads on legs prevent floor marks. Sturdy deep drawers furnished with padlock loops. Shelves S models 16 gauge H,L,K models 14 gauge. Drawer size 14"W x 16"D x 5"H. Cylinder lock available at additional charge.

FWS Series

KNOCK DOWN WORK BENCHES
  Reinforced welded top designed with channels for drawer hanger attachment. Sturdy reinforced legs with floor pads that can be anchored to the floor. Bolts, washers. and nuts are furnished. Elongated holes facilitate fast assembly. Top and legs are constructed of 12 gauge steel, stringers of 16 gauge. Overall 32-1/2" high. Options available at an additional charge: pressed wood top and risers. Adjustable legs and electrical outlets strips. Side and back stops installed at factory. Bench shelf also available.

KD Series

 

KNOCK DOWN WORK BENCHES
  These benches have a hard maple bench top 1-3/4" thick, two bench legs, and one stringer. A third leg is added for units 96" or longer. Bench includes bolts, nuts, lag screws, and washers. All parts are provided for easy assembly. Benches are 34-1/4" overall height. Options available at an additional charge: bench risers, side and back stops, shelves, bench drawer units, and bench cabinet units. Work bench options and accessories available.

W Series

MULTIPLE DRAWER UNIT WORK BENCHES
  12 gauge steel top, side and back stops, and legs. 16 gauge stringers and shelves. The top, stringer, and legs are all reinforced for extra strength. Standard height of the work bench is 32-1/2" high. Benches can be made 34" high at an additional charge. Drawers are 1424-1 (14"W x 23-l/2"D x 5"H). Optional cylinder locks on drawers available at an additional charge. The work bench is equipped with a fluorescent light fixture (lamps included). An 18"W x 33"H back panel is included for the hanging of storage bins. An electrical outlet strip wired with a six foot cord is also included. Ship wt. 350 lbs.

BSD - 3472 - B

MULTIPLE DRAWER UNIT WORK BENCHES
  The DBU-2872-BS work bench is equipped with a fluorescent light fixture (lamps included). Unit equipped with an electrical outlet strip, wired with a six foot cord. A 72"W x 17"H panel is included for the hanging of storage bins. Available with a wood or steel top.

DBU - 2872 - BS

MULTIPLE DRAWER UNIT WORK BENCHES
  Features sixteen drawers for increased storage. Drawers can be furnished with padlock loop eyes or a plain face. There is a sliding tray in each drawer to hold small items within easy reach. Units furnished with 1-3/4" hard maple or 12 gauge steel top. 34" overall height. 72" overall length. Drawer size 14"W x 23-1/2"D x 5"H. Optional cylinder locks on drawers available at an additional charge.

BSD Series
ERGONOMIC HYDRAULIC WORK BENCHES
  These ergonomic benches allow operators to adjust their work surface to accommodate specific height needs with ease. Benches can be ordered with 8", 12" or 16" height adjustment. 1,000 lbs. capacity for 8" & 12" adjustment. 750 lbs capacity for 16" adjustment. 16" adjustment available on benches 34" deep or larger. Available with manual crank handle or electric. The manual crank folds under bench when not in use. The electric unit can adjust height with the push of a button.

HBS - 2848

VERSATILE MODULAR WORK BENCH
  This Versatile Modular Work Bench allows you to choose components to fit your specific applications. Yet it can easily be adapted or expanded later to meet changing needs. Heavy duty construction accomodates all industrial environments. Benches come with standard stringer. A full line of bench accessories are available at an additional charge. Plaese call for more details and a free catalog.

VMW - 3060 - W