DRUM DOLLY TRUCK
 

 

DT Series

2000 lbs. Capacity - 5" x 2" Semi-steel casters (two rigid, two swivel).
2000 lbs. Capacity - 5" x 2" Phenolic casters (two rigid, two swivel).

For transporting drums or other containers. Bracket on handle for holding cable or hose. Accessory box welded to handle for storage of tools and parts. Dimensions 25"W x 33"L x 41"H. Accessory box size 6"W x 21 "L x 12"H. Bottom deck size 25W x 25"L x 2"D. Quick change caster brackets available upon request at an additional charge.

LOW DRUM TRUCK
 

 

LBR-909

800 lbs. Capacity -
3" x 1-1/4" Hard rubber caster,
6" x 2" phenolic wheels.

The low drum truck has a steel tubular T handle with a low frame. Because of the casters and low design, the truck maneuvers easily full barrels and drums with open tops without spilling. 28"W x 33"H 1-1/2" low underslung, 8" above floor. Handles barrels up to 24" diameter. LBR-909H Unit with hinged handle (available at an additional charge). Ship wt. 45 lbs.

 
DRUM DOLLY

AD Series

1200 lbs. Capacity - 3" x 1-1/4" Semi-steel casters.
1000 lbs. Capacity - 3' x 1-1/4" Hard rubber casters.

For round, square, rectangular or any Irregular shaped container. Closes down to 23-1/2". Opens to 36-1/2".

DRUM & CAN DOLLIES

# 81

1200 lbs. Capacity - 3" x 1-1/4" Semi-steel casters.
1100 lbs. Capacity - 3" x 1-1/4" Hard rubber casters.

Large size easy rolling wheels permit quick, safe transportation of even the heaviest loaded drums. 24" diameter holds standard 55 gallon drums or other similiar size containers. 19" diameter for 30 gallons or smaller containers. Galvanized finish for institutional, food processing and sanitary use. Floor clearance 4" on all models. 2" sides on 82 and 83.

 

HI-DRUM & CAN DOLLIES
 

900 lbs. Capacity -
3" x 1-1/4" Semi-steel casters.
700 lbs. Capacity -
3" x 1-1/4" Hard rubber casters.

These dollies provide a higher elevation for easier flow drainage from drums in vertical position. They take up less space than drums in a horizontal position.

#71 with drum

EZY-DOWN CRADLES

EBR-18
700 lbs. Capacity. The cradles give maximum leverage with ease, break the heaviest loaded drums from a vertical to a horizontal position. All models are 18-l/4"W x 31"L x18"H. Models available with casters, rollers, or both casters and rollers. Rollers provide ease in rotating and positioning the drum while the drum is on the cradle. An optional No. 18 removable handle is available.

DRUM STORAGE RACKS

DS Series
Holds four or six drums in readily accessible positions. Designed for loading ease from front or back. Can be moved with fork lift fully loaded. Pads on the bottom legs protect floors. All models 36"D x 48"H.

DRUM STORAGE RACKS

# 85
2500 lbs. Capacity - 6" x 2" Semi-steel casters. The rack holds four drums in readily accessible positions. Designed for loading ease with whatever equipment you may now have. If your hoist does not travel over rack, the 85C model can be moved under your hoist. 30"W x 60"L x 54"H. Quick change caster brackets available upon request at an additional charge.

EXTRA HEAVY PORTABLE VERTICAL DRUM STACKING UNIT

VDU-10
1500 lbs. Capacity. Each unit stacks two drums horizontally. Maximum number of units to be stacked vertically is four. There is a four-way access by fork trucks. Size: 44-l/4"W x 30"D x 13"H. Floor clearance 3-1/2". Ship wt. 84 lbs.

DRUM LIFTER

VH-100
1,000 lbs. Capacity. Lifts from any angle. Load can be balanced. Easily adapted to lift objects of all shapes or lengths. Automatic "upsetting" of containers by adjusting sliding hoist collar. Holds rigidly even when load sways. Adjustment between jaws 16" minimum to 40" maximum. 4"W x 43"L. Weight 24 lbs.

FORK SWIVEL HOIST HOOKS

# 210
 

3,000 lbs. Capacity - Single Fork
4,200 lbs. Capacity - Double Fork

Easy handling by one person. In seconds the hooks can be slid on and tightened into place. Removes just as easily, no wrenches required. No. 210 Double Fork Hook has maximum openings, which permit an outside fork spread of 20-3/4".